Installer Setting-Mode Override Setting - LG Single "A" Service Manual

Part 2 Functions & Controls
Installer Setting -Mode Override Setting
In case of More than 2 indoor units connected to 1 outdoor unit, they are assigned as Master indoor and Slave indoor.
Therefore, they can operate together. (the setting code for this function is not displayed with un-equipped unit).
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
1 Press button for 4 seconds
to enter the installer setting
mode until timer segment
display "01:01".
2 Repeat pressing
Function code 08.
Function Code
Ex) Override 'Master' Setting
3 Select Master/ Slave by pressing
button.
(00: Slave, 01 : Master)
4
Press button to save or release
5 Press button to exit or
system will automatically exit
after 25 seconds without any
input.
- 42 -
button to select
Master/Slave
LGE Internal Use Only