Feeding Motion Of The Unison Feed - Pfaff POWERline 2235 Adjusiment Manual

Adjustment
1

Feeding motion of the unison feed

.05.04
●
8
Requirement
When the needle bar is positioned at b.d.c. (balance wheel position 180°), and the ma-
ximum stitch length is set, the top and bottom feed dogs and the needle bar should not
make any feeding motion when the reverse-feed lever is pressed.
Fig. 1 - 04
Adjust eccentric 1 (screws 2) in accordance with the requirement. Make sure that the
cut-out (see arrow) is visible.
2
1