HD 1500
To access the motor proceed as follows:
l Unscrew the two screws holding the holder for high-
pressure hose (Fig. 10).
Fig. 10
l By means of a suitable screwdriver unscrew the two
screws holding handle and rear foam kit support
(Fig. 11)
Fig. 11
Pour accéder au moteur, procédez de la façon suivante:
l Dévissez les deux vis qui fixent
tuyau à haute pression
l À l'aide d'un tournevis adapté, dévissez les deux
vis qui fixent la poignée et le support pour le kit
savon comme l'illustre la Fig. 11.
23
le support pour
(Fig. 10).