Accessories; General Maintenance; Lubrication - RIDGID R4511 Operator's Manual

WARMNG:
When servicing, use only identical RIDGID re
placement parts. Use of any other parts may
create a hazard or cause product damage.
WARNING:
Always wear safety goggles or safety glasses
with side shields during power tool operation
or when blowing dust. If operation is dusty, also
wear a dust mask.
WARNING:
Before performing any maintenance, make sure
the tool is unplugged from the power supply and
the switch is in the OFF (0) position. Failure to
heed this warning could result in serious persona!
injury.
To avoid possible fire, clean saw dust from
the
cabinet regularly even when
table saw is attached
to a vacuum.
GENERAL MAINTENANCE
Periodically check all clamps, nuts, bolts, and screws for
tightness and condition. Make sure the throat plate is in
good condition and in position.
Check the blade guard assembly.
Remove sawdust from the inside frequently by opening
the motor cover and blowing out the sawdust.
Clean your cutting tools with a gum and pitch remover.
Periodically clean and grease the U-bolt and latch
mechanism on the Herc-U-Lift® Mobile Base. Grease
caster ball bearings and oil caster axle as needed.
Protect the saw blade by cleaning out sawdust from
underneath the saw table and in the blade teeth. Use a
resin solvent on the blade teeth.
Cean plastic parts only with a soft damp c'oth, DO
NOT use any aerosol or petroleum solvents.
WARNING:
Do not at any time let brake fluids, gaso
line, petroleum-based products, penetrat
ing oils, etc., come in contact with plastic
parts. Chemicals can damage, weaken or
destroy plastic which may result in serious per
sonal injury.
LUBRICATION
This saw's motor bearings have been packed at the factory
with proper lubrication.
Clean screw threads and nuts with a solvent recommended
for gum and pitch removal.
Lubricate screw threads, nuts, and bearing points
(including those on the blade guard assembly and miter
gauge).
WARNING:
The following recommended accessories are currently available at retail stores:
AC31 DG1 Dado Throat Plate
WARNING:
Current attachments and accessories available for use with this tool are listed above. Do not use any attachments
or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not
recommended can result in serious personal injury.
44