Compass Function; Showing The Map Data Version - Mercedes-Benz SL Operator's Manual

Navigation
352
XM Radio website at
http://www.sirius.com (USA) or
http://www.siriuscanada.com
(Canada).
Once the connection has been established:
X
Follow the instructions of the operator.
The activation process may take up to ten
minutes.
If registration is not included when
purchasing the system, your credit card
details will be required to activate your
account.

Compass function

In the compass view, you can see the current
direction of travel, the current height above
sea level and the coordinates of the vehicle
position, for example.
X
To switch on navigation mode: press the
Ø function button.
X
To show the menu: press W the COMAND
controller.
X
Position
Select
menu bar by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
X
Compass
Select
Example: compass
Current direction of travel
:
Current height above average sea level
;
(rounded)
in the navigation system
and press W to confirm.
Current vehicle position: longitude
=
coordinates
Number of GPS satellites currently being
?
used
Current vehicle position: latitude
A
coordinates
Currently set steering angle of the front
B
wheels
i To display current elevation ;, the
system must be able to receive at least four
satellites. Steering angle B can be a
maximum of 35° in both directions.
X
To exit the display: confirm
pressing W or press the % back button.

Showing the map data version

X
To show the map data menu: press W
the COMAND controller.
X
Navi
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
X
Map Version
Select
confirm.
The map data version number is shown.
Information about new versions of the
digital map can be obtained from an
authorized Mercedes-Benz Center.
Back
by
and press W to