You can display some driving systems and
additional information in the COMAND
display.
X
Make sure that the SmartKey is in position
2 in the ignition lock.
X
Make sure COMAND is switched on
(
Y
page 275).
X
Press button :.
The corresponding displays appear in the
COMAND display.
Example: displays in the COMAND display
Selection of raised level (
:
Activity of ABC spring struts for roll and
;
pitching support
Selected suspension tuning, i.e. sports or
=
Y
comfort (
page 180)
G-FORCE (longitudinal and lateral
?
acceleration)
Current vehicle level
A
Active Body Control (AMG vehicles)
Vehicle level
Important safety notes
G
Warning
When the vehicle is stationary, you can raise
and lower it from the on-board computer.
Someone could become trapped if the vehicle
is raised or lowered.
Therefore, make sure that nobody is in the
vicinity of the wheel housing or under the
vehicle. Otherwise limbs, e.g. hands and feet,
could become trapped.
Notes
In order to reduce fuel consumption and
improve the driving dynamics, the vehicle is
lowered as its speed increases. With the
SPORT suspension tuning, it is lowered by up
to 0.5 in (13mm), with COMFORT by up to
0.2 in (5mm). As the speed is reduced, the
vehicle is raised up to the set vehicle height.
Select the "Normal" setting for normal road
surfaces and "Raised" for driving with snow
chains or on particularly poor road surfaces.
Setting raised level
Y
page 179)
X
X
X
X
X
X
Driving systems
Make sure that the engine is running or that
it has been switched off by the ECO start/
stop function.
Make sure that a speed of 75 mph
(120 km/h) is not exceeded.
If icon ; is not shown: press =
or ; on the steering wheel to select the
DriveAssist
menu.
Press the 9 or : button to select
Vehicle
Level.
Press the a button.
The following message appears:
'OK' to
Raise.
Press the a button.
If the engine has been switched off by the
ECO start/stop function, it is now
restarted.
Icon ; appears. The vehicle height is
adjusted to raised level.
181
Press
Z