Mercedes-Benz SL Operator's Manual page 93

Each time before driving with the roof down,
check that the wind screen is properly
engaged.
! Install or remove the wind screen only
when the roof is open. You could otherwise
damage the wind screen or the vehicle
interior.
The wind screen offers protection from the
wind when driving with the roof down.
The wind screen can be installed or removed
from the driver's side or passenger side. We
recommend that a second person assists you
when doing this.
Perform operations involving the wind screen
preferably on the side facing away from
traffic, after you have stopped the vehicle,
paying attention to road and traffic
conditions.
Installing/removing
Rear brackets for wind screen
Bracket cover, front-passenger side
:
Bracket cover, driver's side
;
X
To install: open the roof (
X
Press the mark on cover : and push in the
direction of the arrow.
X
Repeat the procedure with cover ;.
The rear brackets for wind screen = are
visible.
=
?
A
B
X
X
X
X
X
X
X
Y page 87).
X
X
X
X
Wind screen
Pin
Front brackets for wind screen
Example: lock cover, front-passenger side
Make sure that wind screen = is folded
back.
Push the upper half of cover B on wind
screen =.
Repeat the procedure with the cover on the
driver's side.
wind screen = is unlocked.
Hold wind screen = at an angle and insert
pins ? into the rear brackets.
Make sure that pins ? sit correctly in the
brackets.
Insert wind screen = into front brackets
A.
Check whether wind screen = is correctly
seated in all four brackets.
Push the lower half of cover B on wind
screen =.
Wind screen = is locked.
Fold wind screen = forward if necessary.
To remove: make sure that wind screen
= is folded back.
Push the upper half of cover B on wind
screen =.
Wind screen = is unlocked.
First remove wind screen = from front
brackets A.
Roof
91
Z