Table of Contents
Advertisement
Information
Highlight Information and press the
Figure 11 : Information screen
Highlight the box beside System ID and press the
the Up and Down arrow buttons to increase and decrease the number from 0 to 99.
Note:
The System ID number is used to identify the unit when it is connected with cameras
through the RS485 port.
Highlight the box beside "Language" and press
languages. Highlight the desired language and press the
The box beside "Version" displays the software version of the recorder.
Figure 12 : Upgrade screen
The screen displays the upgrade package file names that are available. The ".rui" indicates that the file is for
software upgrades.
Select the desired file and press the
install the selected software package. Highlighting the "Cancel" button and pressing the
the window without upgrading the software. If the upgrade package file is not installed on the recorder
properly, you will get an error message. The system restarts automatically after completing the upgrade.
Important: The USB flash drive must be FAT16 or FAT32 format. The recommended
flash drive is USB 2.0 type.
Figure 13 : Setup Import screen
Select the desired setup file and press the "Import" button to import the selected settings and change the
recorder settings accordingly. Highlight "Include Network Setup" and press the
On and Off. When set to Off, the network settings will not be changed.
button. The Information screen appears.
In the "Information" screen, you can name the site
location, assign a System ID number, select the
language the screens are displayed in, display
software version number, upgrade the software, show
the System Log, display recorded time data, and clear
all data.
Highlight the "Site" box and press the
virtual keyboard appears that you can use to enter a
Site Name.
Once you have entered your site name, highlight "OK"
and press the
button. Change the number by highlighting it and using
button. A drop-down menu displays the available
button.
To upgrade the software, connect a USB flash drive
containing the upgrade package file to the recorder.
Highlight "Upgrade..." and press the
"Upgrade" screen appears.
button. Highlighting the "Install" button and pressing the
You can import saved recorder settings or export the current
recorder settings. To import saved recorder settings,
connect the USB flash drive containing the setup file (.dat) to
the recorder. Highlight "Import..." on the Information screen
and press the
button.
button. The
button.
button to toggle between
button. A
button will
button will close
23
Advertisement
Table of Contents
