Listening To Monitor Memories - Radio Shack 200 Ch VHF/Air/UHF Home Scanner Owner's Manual

200ch vhf/air/uhf home scanner with scanner control protocol and wx alert
Hide thumbs Also See for 200 Ch VHF/Air/UHF Home Scanner:
Table of Contents

Advertisement

2. To manually search the band, press
after the scanner starts auto-
HOLD
matically searching the frequen-
cies. The scanner displays
or
, and a frequency within the
band you selected.
3. Repeatedly press
lower to the upper range, or
step from the upper to the lower
range.
Hold down
ond or press
matic search.
4. When the scanner finds an active
frequency, you can do any of the fol-
lowing:
• save the frequency into the cur-
rent monitor memory by pressing
.
MONITOR
• continue searching by pressing
or
.
• stop searching and listen to the
frequency by pressing
(hold) appears.
Note: You can change the direction of a
manual search by pressing
once.
Direct Search
Using direct search, you can enter a fre-
quency, then search for transmissions
above or below that frequency within all
of the frequency bands.
1. Press
MANUAL
2. Use the number keys to enter the
frequency where you want to start
16
H
(hold),
to step from the
or
for about 1 sec-
to return to auto-
HOLD
HOLD
.
the search. Press • to enter the dec-
imal point.
3. Press
from the selected frequency.
(direct) and
next
number flashes.
to
Note: If you entered an invalid fre-
quency in Step 2, the scanner dis-
plays
repeat Steps 2 and 3.
4. When the scanner finds an active
frequency, you can do any of the fol-
lowing:
• save the frequency into the cur-
rent monitor memory by pressing
MONITOR
• continue searching or change the
search direction by pressing
• stop searching and listen to the
frequency by pressing
.
H
(hold) appears.
To manually step through frequencies
one at a time after you stop a search, re-
or
peatedly press
searching, either press
down
LISTENING TO MONITOR
MEMORIES
After you store frequencies into the
scanner's monitor memories, you can
listen to them by pressing
MONITOR
sired monitor memory.
or
to search up or down
or
appear, and the
available
monitor
Error
. Press
.
.
or
or
for about 1 second.
, then the number for the de-
d
memory
, then
CLEAR
or
h
.
HOLD
. To continue
or hold
HOLD
,
MANUAL

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

20-422

Table of Contents