Making An Sdm Call - Motorola GP1280 User Manual

Making an SDM Call

SDM Calls may be initiated in three different
ways:
1. Via the dedicated Data button
2. Via the keypad using a Call modiÞer
3. Via the Contact List
Note: The maximum data message size is limited
to 20 characters which includes address
information and data selection characters.
Data entered via the data button or call mod-
iÞer methods are restricted to digits only in
the range 0-9.
In the contact list method data consists of
digits only which are pre-programmed into
your radio by your dealer.
To initiate a data call via the data button:
1 Ensure radio is in IDLE STATE
2 Enter from key- Called radio address
pad or contact
list:
Display shows:
3 Press dedicated
data button
Display shows:
613
4 Example of data
digits in range 0-9
Display shows:
5 Press PTT button or
dialled numbers
Tone D sounds
Display shows:
6 Press CLEAR button or
to delete dialled numbers and return radio to
IDLE STATE when tone H sounds
207
207D
207D613
#
to make a call to the
Sending Data
Number
*#
at any time
English
33