Features And Controls - Briggs & Stratton Portable Generator Operator's Manual

Features and Controls

Read this Operator's Manual and safety rules before operating your generator.
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
A - Rocker Switch Circuit Breaker — A double pole circuit
breaker is provided to protect the generator against
electrical overload.
B - 120/240 Volt AC, 20 Amp Locking Receptacle — May
be used to supply electrical power for the operation of
120 and/or 240 Volt AC, 20 Amp, single phase, 60 Hz
electrical, lighting, appliance, tool and motor loads.
C - 120 Volt AC, 20 Amp, Duplex Receptacle — May be
used to supply electrical power for the operation of
120 Volt AC, 20 Amp, single phase, 60 Hz electrical,
lighting, appliance, tool and motor loads.
D - Oil Fill Cap — Check and add engine oil here.
E - Oil Drain Plug — Drain engine oil here.
F - Grounding Fastener — Consult your local agency having
jurisdiction for grounding requirements in your area.
G - Spark Arrester Muffler — Exhaust muffler lowers engine
noise and is equipped with a spark arrester screen.
10
H - Air Cleaner — Protects engine by filtering dust and
debris out of intake air.
J - Choke Lever — Used when starting a cold engine.
K - Recoil Starter — Used to start the engine manually.
L - Engine Rocker Switch — Set this switch to ON or I
before using recoil starter. Set switch to OFF or O to
switch off engine.
M - Fuel Valve — Used to turn fuel supply on and off to
engine.
N - Fuel Tank — Capacity of four (4) U.S. gallons (15.14 l).
Items Not Shown:
Engine Identification — Provides model, type and code of
engine. Please have these readily available if calling for
assistance.
Identification Label — Provides model and serial number of
generator. Please have these readily available if calling for
assistance.
N
M
L
K
J
H
G
BRIGGSandSTRATTON.COM