Table of Contents
Advertisement
BT Edge 2100 – Issue 2 – Edition 1.0 – 25.08.05 – 7032
42
Help
No Caller Display number/name displayed
Have you subscribed to a Caller Display service from your
network provider, see page 31.
The caller may have withheld their number.
An exact name/number match was not found in your
Directory. Check that you have stored the full STD
dialling code.
Cannot register a handset to a base
You can register a total of 5 handsets to your BT Edge
2100 base and you can register your BT Edge 2100
handset to up to 4 bases. Check that you have not
exceeded the limits.
Check that you have entered the correct PIN number
(default PIN 0000).
Check that you are at least one metre away from other
electrical equipment to avoid interference when
registering.
Base unit does not ring, but the lights are on
Have you connected the telephone line correctly?
Is the base ringer set to off?
Advertisement
Table of Contents
