Environmental Information; Ec Declaration Of Conformity - Flymo Power Trim Operator's Manual

Husqvarna Outdoor Products are manufactured under an
Environmental Management System (ISO 14001) using,
where practical, components manufactured in the most
environmentally responsible manner, according to com-
pany procedures, and with the potential for recycling at
the end of the products' life.
• Packaging is recyclable and plastic components have
been labelled (where practical) for categorised recy-
cling.
• Awareness of the environment must be considered
when disposing of 'end-of-life' product.
• If necessary, contact your local authority for disposal
information.
If any part is found to be defective due to faulty manufacture
within the guarantee period, Husqvarna Outdoor Products,
through its Authorised Service Repairers will effect the repair or
replacement to the customer free of charge providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty adjust-
ment by the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired, taken apart
or tampered with by any person not authorised by
Husqvarna Outdoor Products.
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
* This guarantee is additional to, and in no way diminishes
the customers statutory rights.
Failures due to the following are not covered, therefore it is impor-
tant that you read the instructions contained in this Operator's
Manual and understand how to operate and maintain your machine:
I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,
NEWTON AYCLIFFE, Co. Durham. DL5
6UP. Certify that the product:-
Category........ Electric Lawn Trimmer
Make.............. Husqvarna Outdoor
Products
Conforms to the specifications of Directive
2000/14/EEC
Type of Cutting Device...... Cutting Line
Identification of Series....... See Product Rating Label
Conformity Assessment Procedure....ANNEX VI
Notified Body.....................Intertek, Cleeve Road, Leatherhead,
Other Directives:-...............98/37/EEC, 89/336/EEC,
& applicable standards:-....EN786, IEC60335-1, IEC60335-2-91,
EN61000-3-2, EN61000-3-3, EN55014-1, EN55014-2
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
5107459-01

Environmental Information

Guarantee & Guarantee Policy

EC Declaration of Conformity

I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,
NEWTON AYCLIFFE, Co. Durham. DL5
6UP Certify that a sample of the above
product has been tested using directive
81/1051/EEC as a guide. The maximum A-
weighted sound pressure level recorded at
operator position under free field semi ane-
choic chamber conditions was :-
Surrey. KT22 7SB England
73/23/EEC
Husqvarna Outdoor Products
Telephone - (00) 44 1325 300303 Fax - (00) 44 1325 310339
The symbol
indicates that this product may not be treated as house-
hold waste. Instead it shall be handed over to the appli-
cable collection point for the recycling of electrical and
electronic equipment.
By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the
environment and human health, which could otherwise
be caused by inappropriate waste handling of this prod-
uct.
For more detailed information about recycling of this
product, please contact your local council office, your
household waste disposal service or the shop where you
purchased the product.
Failures not covered by guarantee
* Replacing Nylon Line.
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in accordance
with the instructions and recommendations contained in this
Operator's Manual.
* Machines used for hire are not covered by this guarantee.
* The following items listed are considered as wearing parts
and their life is dependent on regular maintenance and are,
therefore not normally subject to a valid warranty claim: Nylon
Line, Spool and Line, Electric Mains Cable.
Caution!
*
Husqvarna Outdoor Products does not accept liability under
the warranty for defects caused in whole or part, directly or
indirectly by the fitting of replacement parts or additional parts
that are not either manufactured or approved by Husqvarna
Outdoor Products, or by the machine having been modified in
any way.
Type............................................................................. PWT23
Width of Cut................................................................. 23 cm
Speed of Rotation of Cutting Device........................... 9900 RPM
Guaranteed sound power level................................... 93 dB(A)
Measured Sound Power Level.................................... 92 dB(A)
Level............................................................................ 80 dB(A)
Value...........................................................................
Weight......................................................................... 2.1 kg
Aycliffe Industrial Park
NEWTON AYCLIFFE
Co.Durham DL5 6UP
ENGLAND
on the product or on its packaging
I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,
NEWTON AYCLIFFE, Co. Durham. DL5
6UP Certify that a sample of the above
product has been tested using ISO 5349 as
a guide. The maximum weighted root mean
square value of vibration recorded at opera-
tor's hand position was:-
Newton Aycliffe, 03/10/2005
Research & Development Director
1.0 m/s
2
M. Bowden,