Table of Contents
Advertisement
If any part is found to be defective due to faulty manufacture within
the guarantee period, Husqvarna UK Ltd., through its Authorised
Service Repairers will effect the repair or replacement to the cus-
tomer free of charge providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty adjustment
by the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired, taken apart or tam-
pered with by any person not authorised by Husqvarna UK Ltd..
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
*
This guarantee is additional to, and in no way diminishes the
customers statutory rights.
Failures due to the following are not covered, therefore it is important
that you read the instructions contained in this Operator's Manual
• Awareness of the environment must be considered when dis-
posing of 'end-of-life' product.
• If necessary, contact your local authority for disposal informa-
tion.
The symbol
on the product or on its packaging indicates
that this product may not be treated as household waste. Instead it
shall be handed over to the applicable collection point for the recy-
cling of electrical and electronic equipment.
Husqvarna AB, S-561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Designation..................................Lawn Trimmer
Designation of Type(s).................PTXT25
Identification of Series..................See Product Rating Label
Year of Construction.....................See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC, 2011/65/EU
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-91, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L
given in the table.
The maximum hand / arm vibration weighted value a h measured according to EN ISO 20643 on a sample of the above
product(s) is given in the table.
2000/14/EC: The Measured Sound Power
Conformity Assessment Procedure...............Annex VI
Notified Body.................................................Intertek, Cleeve Road
Huskvarna 17/01/2013
A. Rangert
Global R & D Director - Hand held
Keeper of technical documentation
Type
Width of Cut (cm)
Speed of Rotation of Cutting Device (rpm)
Power (kW)
Measured Sound Power L
Guaranteed Sound Power L
Sound pressure L
Uncertainty K
Hand / arm vibration
Uncertainty K
Weight (Kg)
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Copyright © 2013 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks
5101571-06
Guarantee & Guarantee Policy
Environmental Information
EC Declaration of Conformity
at the operator's position, measured according to EN60335-2-91 is
pA
L
& Guaranteed Sound Power
WA
Leatherhead, Surrey
KT22 7SB, England
(dB(A))
WA
(dB(A))
WA
(dB(A))
pA
(dB(A))
pA
(m/s
2
)
a
h
(m/s
2
)
ah
of Flymo S.A.
Husqvarna AB,
S-561 82
Huskvarna,
Sweden
and understand how to operate and maintain your machine:
Failures not covered by guarantee
* Replacing Nylon Line.
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in accordance with the in-
structions and recommendations contained in this Operator's Manual.
* Machines used for hire are not covered by this guarantee.
* The following items listed are considered as wearing parts and
their life is dependent on regular maintenance and are, therefore
not normally subject to a valid warranty claim: Nylon Line, Spool
and Line, Electric Mains Cable
* Caution!
Husqvarna UK Ltd. does not accept liability under the warranty
for defects caused in whole or part, directly or indirectly by the
fitting of replacement parts or additional parts that are not either
manufactured or approved by Husqvarna UK Ltd., or by the ma-
chine having been modified in any way.
By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate
waste handling of this product.
For more detailed information about recycling of this product,
please contact your local council office, your household waste dis-
posal service or the shop where you purchased the product.
L
values are according to the tabulated figures.
WA
PTXT25
25
10,750
0.5
93
96
77
2.5
1.74
1.5
3.6
Advertisement
Table of Contents
