Pride Euro Seat 2 Basic Operation Instructions page 15

Basic Operation Instructions
To install the armrest assembly:
1. Place the armrest assembly into
the armrest lock. See figure 8.
2. Rotate the armrest lock lever
rearward.
To adjust the top height:
1. If present, remove the optional
locking pin. See figure 9.
2. Pull the armrest up to raise, or
press the release lever to lower the
armrest to the desired height.
3. If applicable, reinsert the locking
pin.
4. Repeat for the other armrest if
necessary.
To adjust the bottom height:
1. Remove the two button head
screws from the detent bar. See
figure 10.
2. Slide the armrest up or down.
3. Line up the holes in the armrest.
4. Reinstall the two button head
screws into the detent bar.
5. Repeat for the other armrest if
necessary.
LOCKING PIN
ARMREST HEIGHT
ADJUSTMENT LEVER
Figure 9. Armrest Top Height
Adjustment
BUTTON HEAD
SCREWS
ARMREST LOCK LEVER
Figure 10. Armrest Bottom Height
Adjustment
www.pridemobility.com
15
DETENT BAR
ARMREST LOCK
Euro Seat 2