The configuration menu LED Admin is shown:
2
3a
3b
3
1. Select the number of screens to be displayed on the LED display panels (a single screen on several LED
display panels is possible).
2. Select the correct gigabit network card.
3. Enter the size and position on the computer monitor for each screen. Click on the corresponding field
below number (blue highlight is displayed).
a) Enter the position of the screen on the x- and y-axis.
b) Enter the size of the screen in pixels.
4. Click on the field parameter set to store your setting. The dialog window Key Input is displayed.
7-3 Configuration menu LED Admin
48/62
4
00049757.DOC, Version 1.0