NEC Electra Elite User Manual page 17

Electra Elite Issue 3
Print
Provides two print options: Job Specifications and Designation Labels
(requires a standard inkjet or laser printer).
When Job Specifications is selected, a menu is displayed. There are three
options for printing the Job Specifications: printing a family (group) such
as system-wide, trunk group, or tenant, printing a range of Memory Blocks,
or printing an individual Memory Block.
Designation Labels
SAT End User version does not support exporting data to the DESI Label
printing software. This menu item is disabled. However, if you chose to
install DESI during SAT installation, you can still run DESI separately by
clicking the Windows 95/98 START button, and then selecting:
PROGRAMS/DESI for Windows/DESI
Print Setup
Allows access to the printer setup screen. This allows the printer
configuration to be modified.
Exit
Exits the programming software. If changes were made, the technician is
prompted to upload the changes before the program shuts down.
SAT End-User Manual 2 - 11