Component Identification - Kärcher DG-232437 Operator's Manual

Pressure
Nozzle
Inlet
Screen
Garden Hose
(not included)
Straight
Through Wand
Pump — Develops high pressure.
Starter Grip— Used for starting the engine manu-
ally.
Spray Gun — Controls the application of water and
detergent onto cleaning surface with trigger device.
Includes safety latch.
Detergent Injector — Allows you to siphon and mix
detergents.
Wand — Must be connected to the spray gun.
6

COMPONENT IDENTIfICATION

Detergent
Injector
Unloader
Pump
Protector
Starter Grip
9.800-082.0 • Rev. 01/08
Pump
Trigger
High Pressure Hose — Connect one end to water
pump discharge nipple and the other end to spray
gun.
Pump Protector — Cycles fresh cool water through
pump when recirculating water reaches 140°F.
Note: If trigger on spray gun is released for more
than 1-2 minutes, water will leak from valve. Warm
water will discharge from pump protector onto
floor. This system prevents internal pump dam-
age.
Detergent
bucket
(not included)
Spray Gun
High Pressure
Hose