Olympus DP73 Instruction Manual page 25

1
Fig. 2
a
2
b
3
c
e
Fig. 3
Open the housing of the computer.
1
2
Remove the clamping screw
PCIe slot on the motherboard and remove the cover.
3
Insert the PCIe interface board
board surface directly by hand, and attach the slot cover using the
clamping screw
4
Connect the FDD power cable
supply to the power connector
If your computer does not have an available FDD power cable or
the FDD power cable is too short, connect the provided HDD-to-FDD
power conversion cable from the computer's HDD power cable to
the power connector
And if your computer does not have an available HDD(4-pin) power
cable, connect the provided SATA-to-HDD(4-pin) power conversion
adapter and HDD(4-pin)-to-FDD power conversion cable from the
computer's SATA power cable to the power connector
4
PCIe interface board
5
d Close the computer housing.
b
of the slot cover
c
carefully without touching the
b
removed above.
d
from the computer's power
e
on the PCIe interface board
e
on the PCIe interface board
c
.
DP73
a
of an unused
c
.
c
.
e
on the
20