4. INSTALLATION
4.2
Receiver Unit
General mounting considerations
• The mounting location should be well ventilated and dry.
• The unit can be mounted on bulkhead or the desk.
• Secure the maintenance space shown in drawing at the back of this manual
for ease of maintenance and service.
Mounting Method
Fasten the receiver unit with four self-tapping screws (5x20, supplied as
installation material). For bulkhead mounting, tighten lower self-tapping screws
so there is 5 mm clearance between bottom of screw head and bulkhead. Then,
hook the receiver unit on the lower screws. Tighten upper screws followed by the
lower screws.
210+1
Fixing hole 2- 6
6
210+1
4-3