Icons - Furuno NX-700A Operator's Manual

2. OPERATION
7. Press ▲ or ▼ to choose Delete, and then press the ENT key.
The message "Delete station?" appears.
8. Press ◄ to choose "Yes", and then press the ENT key to close the edit
window.
9. Press the MENU/ESC key several times to close the menu.
2.14

Icons

The NX-700 shows various icons to denote equipment status, and these are as
shown in the table below.
Icon
Status icon (shown at the tip of display)
L1
L2
I
L1
L2
X
P
R
Message icon (shown next to messages)
NEW
SAR
!!
2-14
Edit
Delete
Status
Shows that an International frequency (518 kHz)
Blinking
message has not been read.
Blinking Shows that a Local frequency message has not
been read.
Blinking
L1: 490 kHz, L2: 4209.5 kHz
Blinking Appears while receiving a message.
I: International frequency (518 kHz)
Blinking
L1: 490 kHz
Blinking
L2: 4209.5 kHz
Displayed when the voltage of the internal battery is
Lighting low. The message "Battery error" also appears on
the display.
Print error (no paper, not connected to the printer,
Lighting etc.). The message "Printer error" also appears on
the display.
Lighting While printing.
Displayed when message is displayed for the first
Lighting time.
(This icon disappeared after 24 hours has passed.)
Lighting Displayed when message type D (SAR) is displayed.
Appears when message type A, B or L (Warning) is
Lighting
displayed.
Lighting Protected message
Meaning