Making coffee
5.
Making coffee
Making coffee with this
machine is only possible
with capsules designed for
this system. Use one capsule
per cup.
Follow the steps in this order:
• Be sure there is enough
• Move the operating lever
• Insert a capsule in the
• Move the operating lever
• Place an empty cup under
• Press the coffee dispensing
The dispensing process stops automatically when the
programmed amount of coffee has been reached. To
interrupt the process at any time, press the button again.
Note
• For safety reasons the dispensing button may be
pressed only if the operating lever is closed.
water in the tank before
making coffee.
back completely.
capsule opening. It auto-
matically falls into the right
position.
completely forward to load
the capsule into the brew-
ing position.
the dispenser.
buttons:
Small cup: 50 ml
(Espresso default setting)
Large cup: 100 ml
(Coffee default setting)
During the dispensing the
chosen button lighting up.
The automatic switch-off
device is programmable
(8. Programming the
amount of water).
6.
After making coffee
After making coffee the
empty capsule is ejected as
follows:
• Move the operating lever
completely back to eject
the empty capsule into the
container. The container
holds up to 10 used cap-
sules. It must be emptied
regularly.
• If you want another cup
of coffee, just insert a new
capsule and press the cof-
fee dispensing button (5.
Making coffee).
Note
• The capsule may stick in the opening if it has been
there for a long time. If so, open and close the
operating lever. If the capsule is still blocked, push
down lightly with a finger.
• Various kinds of coffee (including decaffeinated)
capsules are available.
Tip
• Use thick, pre-heated cups for espressos in order
to prevent cooling down too quickly. Cups can be
pre-heated by rinsing them with hot water.
Caution
To avoid damaging your machine, never use other
makes of capsule.