Making Coffee - Espressotoria System ADESSO Instruction Manual

Making coffee

5.
Making coffee
Making coffee with this
machine is only possible
with capsules designed for
this system. Use one capsule
per cup.
Follow the steps in this order:
The dispensing process stops automatically when the
programmed amount of coffee has been reached. To
interrupt the process at any time, press the button again.
Note
pressed only if the operating lever is closed.
Be sure there is enough
water in the tank before
making coffee.
Move the operating lever
back completely.
Insert a capsule in the
capsule opening. It auto-
matically falls into the right
position.
Move the operating lever
completely forward to load
the capsule into the brew-
ing position.
Place an empty cup under
the dispenser.
Press the coffee dispensing
buttons:
Small cup: 50 ml
(Espresso default setting)
(Coffee default setting)
During the dispensing the
chosen button lighting up.
The automatic switch-off
device is programmable
(8. Programming the
amount of water).
6.
After making coffee
After making coffee the
empty capsule is ejected as
follows:
Move the operating lever
completely back to eject
the empty capsule into the
container. The container
holds up to 10 used cap-
sules. It must be emptied
regularly.
If you want another cup
of coffee, just insert a new
capsule and press the cof-
fee dispensing button (5.
Making coffee).
Note
there for a long time. If so, open and close the
operating lever. If the capsule is still blocked, push
down lightly with a finger.
capsules are available.
Tip
to prevent cooling down too quickly. Cups can be
pre-heated by rinsing them with hot water.
Caution
To avoid damaging your machine, never use other
makes of capsule.