Furuno RC-1800F Operator's Manual page 374

System Status Monitor
BBER:
Shore-to-Ship Attempts:
Ship-to-Shore Attempts:
Distress Alert:
Signal Strength:
Overall Result:
The system status monitor, which is always displayed, provides date,
time, equipment status and navigation data on one screen.
File Edit Transmit EGC
Date 97-08-21
Time 06:12 (UTC)
Position LAT
LON
Waypoint LAT
LON
Course
Speed
Current NCS 344 (IOR) LOGIN
Current Channel LES TDM
Current TDM LES TDM
MES Status Busy
GPS Status ****
DCE Memory 32818 Bytes free
Current State: TESTING
TEST--RECEIVING MESSAGE
DCE Ver 03 Oct-1996
Figure 8-7 System status monitor display
Bulletin Board Error Rate (%). Pass ap-
pears for no error.
Number of tests initiated by LES.
Number of tests initiated by MES.
"Pass (Test OK)" appears for successful
testing.
"Pass" appears if signal strength is greater
than standard level.
"Pass" appears for satisfactory comple-
tion of test.
Reports logs Options
BBER
C/N
Send Level
35:00.00N
RxIF AGC Level
135:00.00E
REF Offset Freq
Synthe 1st-1 Local
1st-2 Local
DEG
RX2nd Local
KTS
Antenna Power Supply
Water Temperature
Water Current
Direction
Speed
Depth
SYNC ( LES )
NCS: IOR LOGIN
Setup Position StopAlarm
004
OK ( 38dB)
OK ( 0)
OK (133)
OK ( 0Hz)
OK
OK
OK
OK
DEG
DEG
KTS
97-08-21 06:12 (UTC)
LAT: 35:00.00N
LON: 135:00.00E
8-7