Preparing Pstn Call Messages - Furuno RC-1800F Operator's Manual

6.4

Preparing PSTN Call Messages

1. Press the [#/SETUP] key to open the Setup menu.
2. Select MESSAGE and press the [ENT] key.
3. Press the [ENT] key to open the CALL TYPE menu.
Message file entry
*
INDIVIDUAL
CALL TYPE : INDIVIDUAL
PSTN CALL
STATION ID : ---------
GROUP CALL
COM. TYPE : TELEPHONE
AREA CALL
COM. FREQ : NO INFO
TEST CALL
DSC FREQ : 2M-INTL
4. Select PSTN CALL and press the [ENT] key.
5. Press the [ENT] key to open the COAST ID entry window.
Message file entry
*
CALL TYPE : PSTN CALL
000000000
COAST ID : 0-------
TEL NO. : ----------------
DSC FREQ : 2M-INTL
6. Key in ID of coast station (seven digits) to send the call to and press the [ENT] key.
7. Press the [ENT] key to open the TEL. NO. entry window.
Message file entry
*
CALL TYPE: PSTN CALL
COAST ID : 001234567
-----------------
TEL NO. : : ----------------
DSC FREQ : 2M-INTL
8. Key in telephone no. (max. 16 digits) and press the [ENT] key.
9. Press the [ENT] key to open the DSC FREQ menu.
How to input coast ID automatically
If you have previously registered some coast IDs,
you can insert them into your message as follows:
1. Press the [FILE] key after completing step 4 in the
above procedure. The following display appears.
PSTN ID file
"
300. FURUNO
"
500. MARINE
"
777. ELECTRIC
# UP $ DOWN
"
2. Select file which contains ID you want to use
(press to show ID number).
3. Press the [ENT] key to insert ID number in message.
How to input telephone no. automatically
If you have previously registered some coast IDs,
you can insert them into your message as follows:
1. Press the [FILE] key after completing step 6 in the
above procedure. The following display appears.
Telephone no. file
"
300. FURUNO
"
500. MARINE
"
777. ELECTRIC
# UP $ DOWN
"
2. Select file which contains no. you want to use
(press to show ID number).
3. Press the [ENT] key to insert no. in message.
Note: You can print the
PSTN ID file list by pressing
the [8/PRINT] key.
Note: You can print the
Telephone no. file list by
pressing the [8/PRINT] key.
6-7