TEC MA-1350-1 Series Programming Manual page 34

Address : 8
([MISC] Key Function)
Bit
No.
1 Total Function
2 Tender Function
3 Validation Print Contents on Over-tendering
4 Cashing with no purchase, using this key
5 Over-tendering (tendering an amount larger than the sale
total, resulting in calculation of change due)
6 In drawer Print on Reports
7 Finalization of R/A transaction
8 Validation Compulsory
Supplementary Description for Address 8:
Bit 1 & 2:
Bit 3: RESET status ............... Prints the sale total amount.
SET status .................... Prints the tendered amount.
In case of a short-tender, the tendered amount is always printed regardless of this bit status
selection.
Bit 4: RESET status ............... Customers' miscellaneous media cannot be cashed outside a sale.
SET status .................... Customers' miscellaneous media can be cashed with no purchase
Bit 5: This Bit status selection is effective only in tendering operation.
SET status .................... If this bit is SET and also Address 11 - Bit 1 is SET (for Short-tendering
Bit 8: SET status .................... When the [MISC] key is operated, the SLIP lamp will flicker to prohibit
Initial SET Bit Nos.
Your Selection
Content
If both RESET or both SET, the [MISC] key functions as tender and total key.
outside a sale.
Prohibited), an amount equal to the sale total is always required for
tendering.
all the operations (including control lock position change and cashier
key change) other than the validation print. The status of this bit is
applicable in the REG or MGR position, and is not applicable in the
" - " position. When the [MISC] key is depressed, the drawer will not
open. It will open when the [VALIDATE] key is depressed.
Follow Bit 2 status.
Follow Bit 1 status.
SALE TOTAL
PROHIBITED
ALLOWED
NOT COMPULSORY
- 32 -
MA-1350-1 SERIES
Selective Status
RESET
SET
TOTAL FUNC-
TION only
TENDER FUNC-
TION only
TENDERED AMOUNT
ALLOWED
ALLOWED
PROHIBITED
PRINT NON-PRINT
PROHIBITED
COMPULSORY
EO3-11084
2 3