Status Clear And Memory Clear Operations; Status Clear - TEC MA-1350-1 Series Programming Manual

3. STATUS CLEAR AND MEMORY CLEAR OPERATIONS

The operations described in this chapter are provided for initial start-up of the machine or emergency but not
to be operated as part of daily routines.

Status Clear

The operation defined as "Status Clear" will only clear an error or key-locked condition that disables normal
operations (though it seldom happens). Thus neither the sales data nor the programmed data will be cleared
by a Status Clear (except that when a Status Clear is operated to clear a key-locked condition during a sale,
the sale item data already entered for the current sale will be cleared).
The Status Clear also has the function to obtain the condition "after all sales data resets" (as if all sales data
had been reset) but will not actually affect any sales data. Such a condition is required in some programming
operations and is usually obtained by taking the required reset reports. However, when you do not want the
sales data to be reset because it is still in the business hours,etc., this function of the Status Clear will be
effective. But be careful in using the function; depending on the programming item, sales data resets may
really be necessary instead of a Status Clear, to keep consistency between the programmed data and the
sales data.
Operating Procedure
Condition: Any time, outside or during any operation sequence
Operation: Remove the plug of the register's power cord from the wall outlet (to turn OFF the power).
Use the S Key to turn the
Control Lock to "BLIND".
Plug in the cord (to turn ON the power).
A Status Clear receipt is issued.
MGR
X
REG
-
OFF
Z
SET
(BLIND)
Status Clear Symbol
Date, Consecutive No.,
and Time are not reset.
- 9 -
MA-1350-1 SERIES
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
11-28-1997 #0
STATUS-C
0002 10:26TM
EO3-11084