Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Baumatic BHG690SS-ANZ
Summary of Contents for Baumatic BHG690SS-ANZ
- Page 1 BHG690SS-ANZ BHG695SS-ANZ BHG790SS-ANZ Gas Cooktop...
- Page 2 User Manual for your Baumatic BHG690SS-ANZ / BHG695SS-ANZ 60 cm 4 Burner Gas Cooktops BHG790SS-ANZ 70 cm 5 Burner Gas Cooktop NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...
-
Page 3: Table Of Contents
Contents Enviro nmental note Important safety information 5 – 7 Specifications 8 – 12 BHG690SS-ANZ BHG695SS-ANZ BHG790SS-ANZ Electrical details Gas details Gas hob surface layout Using the gas hob 13 - 14 Before first use Switching the hob on Automatic ignition with flame failure device... -
Page 4: Environmental Note
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment. -
Page 5: Important Safety Information
You should not use this appliance to store items on or as a work surface. o No modifications to the appliance are permitted by Baumatic Ltd. o You should not store or place flammable or highly flammable liquids/materials on top of or near the appliance. Items made from aluminium, plastic or plastic film should also be kept away from the appliance, as they may fuse to the surface. - Page 6 Child Safety o Baumatic strongly recommend that babies and young children are prevented from being near to the appliance and not allowed to touch the appliance at any time. During and after use, all surfaces will be hot. o If it is necessary for younger family members to be in the kitchen, please ensure that they are kept under close supervision at all times.
- Page 7 Baumatic Ltd. declines any responsibility for injury or damage, to person or property, as a result of improper use or installation of this appliance. o Baumatic Ltd. DO NOT recommend that this appliance is installed on any type of marine vessel. Declaration of conformity...
-
Page 8: Specifications
Specifications BHG690SS-ANZ Product dimensions: Aperture dimensions: Depth: 510 mm Depth: 480 mm Width: 600 mm Width: 560 mm Height: 40 mm Product specifications: o 1 x 10.8 MJ/h rapid burner o 2 x 6.3 MJ/h semi-rapid burners o 1 x 3.6 MJ/h auxiliary burner... -
Page 9: Bhg695Ss-Anz
BHG695SS-ANZ Product dimensions: Aperture dimensions: Depth: 510 mm Depth: 480 mm Width: 600 mm Width: 560 mm Height: 40 mm Product specifications: o 1 x 12.6 MJ/h triple crown (wok) burner o 2 x 6.3 MJ/h semi-rapid burners o 1 x 3.6 MJ/h auxiliary burner o Front control operation o Automatic ignition o Heavy duty cast iron pan stands... -
Page 10: Bhg790Ss-Anz
BHG790SS-ANZ Product dimensions: Aperture dimensions: Depth: 510 mm Depth: 480 mm Width: 700 mm Width: 560 mm Height: 40 mm Product specifications: o 1 x 12.6 MJ/h triple crown (wok) burner o 1 x 10.8 MJ/h rapid burner o 2 x 6.3 MJ/h semi-rapid burners o 1 x 3.6 MJ/h auxiliary burner o Front control operation o Automatic ignition... -
Page 11: Electrical Details
Electrical details Rated Voltage: 220 - 240 Vac 50 / 60 Hz Supply Connection: Max Rated Inputs: 0.0008 kW Mains Supply Lead: 3 core x 0.75mm² (Type RR-F <HAR> marked) Gas details Connection: Rp ½ (ISO R7) Type: Natural Gas (1.0 KPa) ULPG (2.75 KPa) For future reference please record the following information which can be found on the rating plate and the date of purchase which can be... -
Page 12: Gas Hob Surface Layout
Gas hob surface layout BHG690SS-ANZ A = 10.8 MJ/h rapid burner B = 6.3 MJ/h semi-rapid burners C = 3.6 MJ/h auxiliary burner D = Control panel BHG695SS-ANZ A = 12.6 MJ/h wok burner B = 6.3 MJ/h semi-rapid burners C = 3.6 MJ/h auxiliary burner... -
Page 13: Using The Gas Hob
Using the gas hob Before first use IMPORTANT: You should clean the hob surface (see “Cleaning and maintenance” section). Switching the hob on The following symbols will appear on the control panel, next to each control knob: = gas off Large flame: maximum setting Small flame: minimum setting o The minimum setting is at the end of the anti-clockwise rotation of... -
Page 14: Energy Saving Tips
o After this 20 second interval, turn the control knob to your required setting between the maximum and minimum setting symbols. o To switch the burner off, turn the control knob fully clockwise to the gas off position. o In case of power failure, the burners can be lit by carefully using a match. -
Page 15: Cleaning
Cleaning Cleaning operations must only be carried out when the hob is cool. The appliance should be disconnected from your mains supply before commencing any cleaning process. Cleaning the hob top Any residues that are left on the hob top surface from cleaning agents will damage it. -
Page 16: Maintaining The Cast Iron Pan Stands
The installation must be carried out by a suitably qualified person, in accordance with the current version of the following. o Gas Safety and Measurement Regulations 2010 o AS/NZS 3000 Wiring Rules o Electricity Safety Regulations 2010 o Baumatic Ltd Installation Instructions... -
Page 17: Positioning
85°C above the ambient temperature of the room it is located in, during periods of use. * 600 mm (BHG690SS-ANZ / BHG695SS-ANZ) * 700 mm (BHG790SS-ANZ) o This appliance can be located in a kitchen, a kitchen diner or a bed sitting room. -
Page 18: Unpacking The Appliance
Unpacking the appliance When unpacking the appliance please check that the following items are contained within the packaging: 1 x Baumatic hob Pan stands Burner assemblies Instruction manual Baumatic warranty card Fixing screws Clamps Sealing strip LPG conversion jets Self-adhesive label for amending the gas category on the appliance’s rating plate (required if the LPG conversion jets are used). - Page 19 o Cut a hole in the worktop that corresponds with the relevant drawing for your hob on page 18. All models o IMPORTANT: You must have a gap of at least 25 mm between the underneath of the appliance and any surface that is below it. o Carefully turn the hob upside down and place it on a cushioned mat.
-
Page 20: Gas Connection
The hob must be installed by a qualified person, in accordance with the current edition of the Gas Safety and Measurement Regulations 2010 and the relevant building Regulations. o Failure install appliance correctly could invalidate Baumatic’s guarantee and lead to prosecution under the regulations quoted above. -
Page 21: Ventilation Requirements
Ventilation requirements o The room containing the hob should have an air supply in accordance with the current edition of BS 5440: Part 2: o The room must have opening windows or equivalent; some rooms may also require a permanent vent. o If the room has a volume between 5 and 10m³, it will require an air vent of 50cm²... -
Page 22: Gas Safety (Installation And Use) Regulations
Gas Safety (Installation and Use) Regulations IMPORTANT: The appliance MUST be connected to the gas supply by use of a 15 mm x ½” female coupler, seal, copper pipe and an isolation tap fitted in an easily accessible position. o It is the law that all gas appliances are installed by competent persons in accordance with the current edition of the Gas Safety and Measurement Regulations 2010. -
Page 23: Gas Adjustment (Conversion To Lpg)
Gas adjustment (Conversion to LPG) All work must be carried out by a registered gas fitter. IMPORTANT: Always isolate the hob from the electricity supply before changing the injectors and/or adjusting the minimum flow of the burners. o Remove the pan-stands, burners and flame spreaders (A). -
Page 24: Minimum Flow Adjustment For Hob Gas Taps
Minimum flow adjustment for hob gas taps. All work must be carried out by a registered gasfitter. IMPORTANT: Always isolate the hob from the electricity supply before changing the injectors and/or adjusting the minimum flow of the burners. o Switch the burner on and set the knob at the minimum position. -
Page 25: Gas Tap Maintenance
Gas tap maintenance These maintenance operations MUST ONLY be carried out by a registered gasfitter. IMPORTANT: Before carrying out any maintenance operations, disconnect the appliance from the gas and electricity supplies. If a gas tap becomes stiff to operate, then you should proceed as follows: o Remove the control knobs, pan supports, burners, hob fixing screws and clamps. -
Page 26: Safety Warnings
Safety warnings... -
Page 27: Electrical Connection
Replacing the mains supply cable If the mains supply cable is damaged, then it must be replaced by an appropriate replacement which can be obtained from the Baumatic Spares Department. The mains supply cable should be replaced in accordance with the following instructions: o Switch the appliance off at your mains supply. - Page 28 BHG690SS-ANZ/ BHG695SS-ANZ BHG790SS-ANZ...
-
Page 29: My Appliance Isn't Working Correctly
Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the warranty card that you receive with the appliance. - Page 30 Service Telephone 1800 444 357 Website www.thinkappliances.com Applico Ltd. Private Bag 92900 Onehunga, Auckland 1061, New Zealand Website www.baumatic.co.nz United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Website: www.baumatic.co.uk...