Dear customer, Thank you for having chosen our induction ceramic hob. In order to make the best use of your appliance, we would advise you to read carefully the following notes and to keep them for a later consulting. SUMMARY SAFETY ............................
SAFETY Precautions before using • Unpack all the materials. • The installation and connecting of the appliance have to be done by approved specialists. The manufacturer can not be responsible for damage caused by building-in or connecting errors. • To be used, the appliance must be well-equipped and installed in a kitchen unit and an adapted and approved work surface.
• In general do not place any metallic object except heating containers on the glass surface. In case of untimely engaging or residual heat, this one may heat, melt or even burn. • Never cover the appliance with a cloth or a protection sheet. This is supposed to become very hot and catch fire.
• WARNING: Danger of fire: do not store items on the cooking surface. • Never place any hot container over the control panel. • If a drawer is situated under the embedded appliance, make sure the space between the content of the drawer and the inferior part of the appliance is large enough (2 cm).
Other protections • Note sure that the container pan is always centred on the cooking zone. The bottom of the pan must have to cover as much as possible the cooking zone. • For the users of pacemaker, the magnetic field could influence its operating.
DESCRIPTION OF THE APPLIANCE Technical characteristics Type BIC32 Total power 3700 W Energy consumption for the hob EC 172.9Wh/kg Front heating zone Ø 175 mm Minimum detection Ø 90 mm Nominal power* 1100 W Booster power* 1400 W Standardised cookware category** Energy consumption EC 177.3 Wh/kg...
USE OF THE APPLIANCE Display Display Designation Function Zero The heating zone is activated. 1…9 Power level Selection of the cooking level. Pan detection No pan or inadequate pan. Error message Electronic failure. Residual heat The heating zone is hot. Booster The boosted power is activated.
Starting-up You must first switching on the hob, then the heating zone: • Start-up/ switch off the hob: Action Control panel Display To start Press key [ 2 x [ 0 ] Touch the key Press key [ Nothing or [ H ] •...
Timer The timer is able to be used simultaneous with all 2 heating zones and this with different time settings (from 0 to 99 minutes) for each heating zone. • Setting and modification of the cooking time: Action Control panel Display Zone selection Press selection key from the zone...
Control panel locking To avoid modifying a setting of cooking zones, in particular with within the framework of cleaning the control panel can be locked (with exception to the On/Off key [ • Locking: Action Control panel Display Start Press key [ [ 0 ] or [ H ] Hob locking Press simultaneously [ - ] and...
COOKING ADVICES Pan quality Adapted materials: steel, enamelled steel, cast iron, ferromagnetic stainless-steel, aluminium with ferromagnetic bottom. Not adapted materials: aluminium and stainless-steel without ferromagnetic bottom, cupper, brass, glass, ceramic, porcelain. The manufacturers specify if their products are compatible induction. To check if pans are compatibles: •...
Examples of cooking power setting (the values below are indicative) 1 to 2 Melting Sauces, butter, chocolate, gelatine Reheating Dishes prepared beforehand 2 to 3 Simmering Rice, pudding, sugar syrup Defrosting Dried vegetables, fish, frozen products 3 to 4 Steam Vegetables, fish, meat 4 to 5 Water...
Page 14
II) First step : cancel the existing configuration 1) Press [ - ] and hold down 2) With your other hand, press successively and quickly (less than 2s) on each [ O ] key. Press 2 times each key in the following order (a ->...
The control panel displays [ ] or [ Er03 ] : • An object or liquid covers the control keys. The symbol disappear as soon as the key is released or cleaned. The control panel displays [ E2 ] or [ E H ] : •...
Cut-size 495 x 270 mm BIC32 • Ensure that there is a distance of 50 mm between the hob and the wall or sides. • The hobs are classified as “Y” class for heat protection. Ideally the hob should be installed with plenty of space on either side.
ELECTRICAL CONNECTION • The installation of this appliance and the connection to the electrical network should be entrusted only to an electrician perfectly to the fact of the normative regulations and which respects them scrupulously. • Protection against the parts under tension must be ensured after the building-in. •...
Page 21
Subject to the exclusions below, we warrant that the product will not have any electrical or mechanical breakdowns within: a) In the case of Baumatic products used for personal, domestic or household purposes, a period of 2 years from the date the product is purchased as a brand-new product from a...
Page 22
c) The repair relates to the replacement of consumable parts such as fuses and bulbs or any other parts of the product which require routine replacement; d) You are unable to provide us with reasonable proof of purchase for the product; e) the breakdown occurs after the expiry of the express warranty period set out in section 1 or f) the product was not purchased in Australia as a brand-new product.
Page 23
5. Warranty claims If you make a valid claim under this warranty and none of the exclusions set out in section 2 apply, we will, at our election, either repair the product or replace the product with a product of identical specification (or where the product is superseded or no longer in stock, with a product of as close a specification as possible).
Page 24
READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE APPLIANCE. The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation or improper use of the appliance. The manufacturer is not responsible for any inaccuracies, due to printing or transcription errors, contained in this manual.
Need help?
Do you have a question about the BIC32 and is the answer not in the manual?
Questions and answers