Materials Included In This Package - Audiovox AVXMTG10UA Installation Manual

MATERIALS INCLUDED IN THIS PACKAGE

1
5
9
*Note: The AVXMTG10UA is supplied with a black snap-on shroud and screen cover. To install the pewter or shale snap-on shroud or screen cover, the black
snap-on shroud and screen cover must be removed first. See the following page for the removal process.
3
2
7
6
10
1. 10" LCD Overhead Monitor with DVD player
2. 12 Pin Power Harness
3. 2 Pin Power / Wire Harness with Choke
4. Hardware Package
4
M2.6 x 6mm Phillips Screws
M4 x 15mm Phillips Screws
M5 x 9mm Phillips Screws
M5 x 20mm Phillips Screws
M5 x 40mm Phillips Screws
CAUTION: The 20mm and 40mm screws in the hardware
kit are provided to facilitate installation. Use extreme
caution when using these screws to avoid damage to
vehicle roof or other components, wiring, etc.
8
5. Remote Control
6. Mounting Bracket
7. Snap-on Shroud
8. Snap-on Screen Cover
9. Pry Tool
10. 3.5mm TIP/3RCA JACK PIG TAIL
11. Trim Ring
11
4
(1 pc)
(1 pc)
(1 pc)
(10 pcs)
(4 pcs)
(4 pcs)
(4 pcs)
(4 pcs)
(1 pc)
(1 pc)
(2 pcs)*
(2 pcs)*
(1 pc)
(1 pc)
(3 pcs)