Functional Description; Intended Use - Festool C 12 Li Instruction Manual

Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Conservation charging current, pulsating
Charging times for
Permitted charging temperature range
Temperature monitoring
Battery pack
Order number
Voltage
Capacity
Weight
* Speed specifications with fully charged bat-
tery pack.
The pictures for the functional description
are on a fold-out page at the beginning of the
instruction manual. When reading of the
manual you can fold out this page for having
always an overview of the machine.
[1-1] Torque thumbwheel
[1-2] Bit store
[1-3] LED lamp
[1-4] Gear switch
Cordless drills are suitable for drilling into
metal, wood, plastics and similar materials
as well as inserting and tightening screws.
The charger TRC 3 is design for charging the
battery packs listed.
LiIon 1.3 Ah/ 2.6 Ah, 80 %
LiIon 1.3 Ah/ 2.6 Ah, 100 %
BPC 12 Li
497019
10.8 V
1.3 Ah
0.3 kg
** The maximum speed is reduced in the
lower torque stages.

Functional description

[1-5]
[1-6]
[1-7]
[1-8]
[1-9]
[1-10]
[1-11]

Intended use

The user bears the responsibility for
damage and accidents caused by im-
proper use; this also includes damage
and wear caused by continuous use in
industry.
approx. 22/ 45 min
approx. 35/ 70 min
BPC 15 Li
Drilling symbol
Screwdriving symbol
Drilling/Fastening selector switch
Right/left switch
On/Off switch
Belt clip
Buttons for releasing the battery
pack
WARNING
TRC 3
120 V ~
60 Hz
7.2 - 18 V (DC)
max. 3 A
approx. 0.06 A
-5 °C to +45 °C
via NTC resistor
497020
14.4 V
2.6 Ah
0.6 kg
9