Technical Data - Festool C 12 Li Instruction Manual

make a connection from one terminal
to another. Shorting the battery termi-
nals together may cause burns or a fire.
d)Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
fl ush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
6 SERVICE
a)Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Machine-related safety
instructions
– Wear ear protectors with impact drills.
Exposure to noise can cause hearing loss.
– Use auxilliary handle supplied with
the tool. Loss of controll can cause per-
sonal injury.
– Hold power tools by insulated gripping
surface when performing an operation
where the cutting tool may contact
hidden wiring or its own cord. Contact
with a "live" wire will mak exposed metal
Cordless drill
Motor voltage
Idling speed*
Max. torque
Adjustable torque**
Chuck clamping range
Drill diameter max.
Tool holder in drill spindle
Weight without battery pack with Centrotec
8
parts of the tool "live" and shock the oper-
ator.
contains chemicals known (to the State of
California) to cause cancer, birth defects or
other reproductive harm. Some examples of
these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from chemical-
lytreated lumber.
area, and work with approved safety equip-
ment, such as dust masks that are specially
designed to filter out microscopic particles.
Wash hands after handling.
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL.

Technical data

1st gear
2nd gear
Soft material (wood)
Hard material (metal)
1st gear
2nd gear
Wood
Metal
Health hazard by dust
WARNING! Various dust created by
power sanding, sawing, grinding, drill-
ing and other construction activities
The risk from these expo-
sures varies, depending on
how often you do this type
of work. To reduce your ex-
posure to these chemicals:
work in a well ventilated
WARNING
C12 Li
10.8 – 12 V
0 - 450 rpm
0 - 1500 rpm
20 Nm
34 Nm
0.5 - 8 Nm
0.5 - 6 Nm
1.5 - 13 mm
25 mm
14 mm
1/4 ''
0.9 kg
C15 Li
14.4 – 15.6 V
25 Nm
40 Nm
35 mm
16 mm
1/4 ''
1.0 kg