Page 1
CDD 9.6 FX CDD 12 FX Cordless Drill / Instruction manual Screwdriver Page 4 IMPORTANT: Read and understand all instructions before using. Perceuse visseuse á Guide dutilisation accumulateur Page 8 IMPORTANT: Lire et comprendre toutes les instructions avant de démarrer les travaux.
ensure these are connected and properly used. GENERAL SAFETY RULES Use of these devices can reduce dust related WARNING! Read and understand all hazards. instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or Tool use and care serious personal injury.
Page 5
The charger MC 15 can be used to charge all continued after 1-2 seconds when the LED shows NiCd-FESTOOL battery packs between 4.8 V and a steady yellow. 12 V in the battery chamber (3.1).
Page 6
b) Charging with the MC 15 Tool holding fixture, attachments - Connect charger to mains. The line Make sure that the machine is voltage and frequency must correspond with switched of and the battery block has been the data on the ratings plate! removed before changing the tool holding fixture, attachments and tools.
Page 7
Festool Accessories, tools after-sales service department or approved waste The accessory and tool order number can be disposal facilities. This ensures that they are found in the Festool catalogue or on the Internet correctly recycled. under "www.festool.com". Warranty Bit depot...
Need help?
Do you have a question about the CDD 9.6 FX and is the answer not in the manual?
Questions and answers