Notification Out - Digimerge D204 SERIES Installation Manual

Event Notification

Notification Out

Configuration settings for Notifications.
Notification Out
1. EMAIL: Specifies an event type to be sent as an automatically generated email. Press the
and buttons to highlight, and press the SEL key to enter the Email submenu:
• VIDEO LOSS: Sets the Video Loss Event send to ON/OFF
• ALARM: Sets the Alarm Event send to ON/OFF
• MOTION: Sets the Motion Event send to ON/OFF
• POWER LOSS: Sets the Power Loss Event send to ON/OFF
• SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
buttons to highlight, and press the SEL button to accept the changes.
2. BEEP: Turns the audible alerts ON/OFF when an event is detected. Press the
to highlight, and press the SEL key to enter the Beep submenu. Options within this menu are
the same as the EMAIL SUBMENU above.
3. ALARM OUT: Turns the alarm out to ON or OFF when an event is detected. Press the
buttons to highlight, and press the SEL key to enter the Alarm out submenu. Options within
this menu are the same as the EMAIL SUBMENU above.
4. DURATION: Specifies the length of time for an event. Press the
and press the
42
Email
Beep
Alarm Out
Duration
buttons to change the duration to 5 seconds, 10 seconds or 20 seconds.
Video Loss
Alarm
Motion
5 Sec.
Power Loss
Save & Exit
INSTALLERS MANUAL |
Copyright
SECTION 4
OFF
ON
ON
OFF
and
and buttons
and
and buttons to highlight,
©
2007 Digimerge Technologies Inc.