Ix-Scif; Ix-Hcif; Ix-Misc; Ix-Edctu - Iwatsu Omega-Phone Adix APS Owner's Manual

IX-SCIF

This card provides two serial communication ports (RS232C) for Station
Message Detail Recorder (SMDR) and an on-site programming terminal.
Ports: 2 ports
Data Speed: Printer-300/1200 bps, Terminal-1200/4800 bps
Communication Mode: RS232C

IX-HCIF

This card provides two serial communication ports (RS232C) for advanced
functions such as Call Center Reporting, Unified Messaging, and Lodging
Management Services, as well as Station Message Detail Recorder (SMDR)
and on-site programming.
Ports: 2 ports
Data Speed: Printer-300/1200 bps, Terminal-1200/4800 bps
Communication Mode: RS232C

IX-MISC

A Miscellaneous card (IX-MISC) converts the system ports for input/output
functions. These functions include an external MOH source, an external
BGM source, paging applications, remote control relays and sensor inputs.
This card requires the IX-EDCTU board for external MOH source
connection. This card must be installed in the right most slot of each shelf.
Ports: 8 ports
Functions: BGM input, BGM amplifier control, MOH input, output to
paging amplifier, four paging zone control, 8 programmable
relays or four sensor inputs and four programmable relays..

IX-EDCTU

This unit is used to connect the external devices (MOH, BGM, relays, etc.) to
the IX-MISC card. This unit is connected to the IX-MISC card through a
ribbon cable.
ADIX APS GENERAL DESCRIPTION - 36