CLOCK SET/ADJUSTMENT
Allows you to change the time for the system clock.
Operation
This feature is performed by using the display and the Soft Function buttons.
To get to the Clock Set/Adjustment prompts:
Press the ETC button three times and the display will show:
CLK
F1
Press the F1 CLK button and the display will show:
Set Time H H :M M
ADJ
F1
To change the time:
Dial the time in military time H H :M M
Press the Release button END
To adjust the seconds to zero:
Press the F1 ADJ button and the display will show:
Clock Adjustment
SET
F1
Press the F1 SET button to start the clock with zero seconds
elapsed.
Press the Release button END
If the seconds shown on the display are less than 30 the minutes
digit will remain the same. If the seconds shown on the display are
greater than 30, the minutes digit will advance one digit.
ATTENDANT CONSOLE USER GUIDE - 163
VSSR
F2
F3
F4
F5
F2
F3
F4
F5
F2
F3
F4
F5
F6
F6
F6