Scan Setup - Blueview BV5000 User Handbook Manual

Scan Setup

Rotational scans are performed by clicking
File Start Scan or the Start Scan button on
the Pan/Tilt control panel. Both Single Scans
and Spherical Scans can be performed. All
settings for a single scan can be set in the
Scan Setup window. Additional settings for
Spherical Scans are located in the Settings
window (File Settings
Running Single Scans
The term "single scan" refers to a scan
collected at a single tilt angle. To run a single
scan, first move the sonar to the desired tilt
angle, then check the Single Scan box, set the
desired Scan Speed and Total Pan Angle, and
click Start Scan. A progress window will
appear, while the scan is running.
Running Spherical Scans
Spherical scans allow a greater volume to be
scanned in a single operation. Spherical scans
are created by taking several overlapping
scans at different tilt angles. The Total Pan
Angle and Center Scan option are applicable to
spherical scans as well.
© BlueView Technologies Corp
Scan Settings.)
30
BlueView BV5000 User Handbook