Installation Preparation; Attaching The Handles - Baumatic TITAN5 Instruction Manual

Installation preparation

IMPORTANT: A minimum of two people should
complete all of the installation steps given in this
manual.
o Check that the appliance will easily pass through all doorways en
route to its final position.
o Appliance dimensions: 1770 mm(h) x 910 mm(w) x 700 mm(d).
(excluding door handles).
o If your appliance will not fit through a doorway, then it is
possible to remove the fridge section doors and freezer drawers.
o Before commencing the door removal process outlined on the
following pages, you should undo the retaining screws on the top
cover. Then remove the top cover and place it somewhere safe,
as you will need to refit it later.

Attaching the handles

Refrigerator door handle
o Put the handle connector into the right holes on the refrigerator
door using a screwdriver (1).
o Place the refrigerator door handle onto the handle holder and
keep the hole of the handle holder and handle connector to the
right position of the vertical direction (2).
o Insert the connecting bolt of the handle into the two holes of the
handle holder with the help of a six angle screwdriver (3).
39