Table of Contents
Advertisement
Installation and connections
Selecting the location
Positioning the
appliance
• Place the appliance in dry and well aired room. The applian-
ce operates best at temperature ranges indicated in the chart
below. Relevant class of the appliance is indicated on the
rating plate.
Class
SN (subnormal)
N (normal)
ST (subtropical)
T (tropical)
Positioning the appliance requires two persons in order to avoid
injuries or damage to the appliance.
• Place the appliance flatly and firmly on a solid base. The
appliance is fitted with adjustable feet on the front side, used
to level the appliance (certain models only).
• Avoid exposing the appliance to direct sunlight or heat
sources. If this is not feasible, install insulation plate between
the appliance and adjacent heat source.
• This product is designed to be fixed into the kitchen cabine-
try, for installation instructions refer to the installation guide..
Be sure to leave enough space for cooling of condenser
(distance from the wall or the opening should be 200 cm
Distance to the cabinet above the appliance should be at
least 5 cm.
After the installation, the appliance mains plug should be
accessible!
Ambient temperature
from + 10°C to + 32°C
from + 16°C to + 32°C
from + 16°C to + 38°C
from + 16°C to + 43°C
).
2
7
Advertisement
Table of Contents
