Table of Contents
Advertisement
Installation
The manufacturer declines all responsibility in the event of the installer
failing to observe all the accident prevention regulations in force,
which are necessary for normal use and the regular operation of the
electric system.
Electrical connection
o Your refrigerator comes supplied with a 13 amp plug fitted. If in
o The wiring in the mains lead is coloured as follows:
o As the colours of the wires in the appliance's mains lead may not
o When the connection is completed, no stray strands or cut wire
Get user manuals:
See SafeManuals.com
IMPORTANT: Before installation and usage,
read all the instructions and make sure tha
voltage (V) and the frequency (Hz) indicated on
the rating plate are exactly the same as the
voltage and frequency in your home. The rating
plate can be found on the front left edge of the
inside of the refrigerator.
YOUR REFRIGERATOR IS INTENDED FOR FITTED
AND PERMANENT INSTALLATION.
We recommend that the appliance is connected by a
qualified electrician, who is a member of the N.I.C.E.I.C.
and who will comply with the I.E.E. and local regulations.
future you need to change the fuse in this plug, then a 13 amp
ASTA approved (BS 1362) fuse must be used.
Brown
Blue
Green and yellow
correspond with the coloured markings identifying the terminals
in your spur box, please proceed as follows:
The brown wire must be connected to the terminal marked "L"
(live), or coloured red.
The blue wire must be connected to the terminal marked "N"
(neutral), or coloured black.
The green and yellow wire must be connected to the terminal
marked "E" (earth), or by the earth symbol, or coloured green
and yellow.
should be present. The cord clamp must be secured over the
outer sheath.
Live
Neutral
Earth
t the
15
Advertisement
Table of Contents
