Specifications - Jensen JiMS-60 Owner's Manual

AM band is too
noisy.
Sound is
distorted.
Unit gets warm
after extended
play at high
volume.
Power Requirement
Main Unit
Back-up Battery for Clock
Frequency Range
Radio
"Made for iPod" means that an electronic accessory has been designed to
connect specifically to iPod and has been certified by the developer to meet
Apple performance standards.
iPod is not installed
properly.
iPod is locked up/ frozen.
iPod battery has problem.
The reception at the set
location is poor.
iPod is docked or near
the unit
Volume level is set too
high.
Sound source is
distorted.
This is normal.

SPECIFICATIONS

AC 120V~ 60Hz 10W
1 x DC 9V 006P(6F22) Battery
AM 530 - 1710 kHz
FM 88 - 108 MHz
Remove your iPod from the dock and
check for obstruction on the
connectors in the dock and on your
iPod. Then reseat it in the dock.
Please make sure your iPod is working
properly before docking into the unit.
Please refer to your iPod manual for details
on resetting.
Slightly rotate the unit for the best
reception.
Remove the iPod from the dock and
move it away from the unit.
Decrease the volume.
If the iPod original sound source is of
poor quality, distortion and noise are
easily noticed with high-power
speakers. Try a different audio source
such as a music CD.
If you are using an external sound source
like older generation of iPod, try reducing
the output volume on the device itself. Also
try turning bass boost OFF or change the
EQ setting.
Turn the unit off for a period of time or
lower volume.
13