Specifications - Jensen JiMS-182 Owner's Manual

Symptom
Radio
Noise or sound distorted
on AM or FM
broadcasting.
AM or FM no sound
iPod
iPod will not play
Alarm
No Alarm
Abnormal Operation
Clock, iPod, Radio or
AUX IN not functioning
Abnormal or no display Internal micro controller needs
GENERAL
Power source --------------------------------- DC 6V 2000mA AC adapter (Included)
Possible Cause
Station is not tuned properly
for AM or FM.
FM: The broadcast station
signal is weak
AM: The location of the built-in
antenna is not correct.
Unit is not in RADIO function
mode
Volume is at minimum
Unit is not in iPod mode
iPod is not inserted properly
Alarm is not activated
Incorrect Alarm time
Internal micro controller needs
to be reset
to be reset

SPECIFICATIONS

Fine-tune the AM or FM
broadcast station.
Find another station or
relocate the unit until the
best reception is obtained.
Remove your iPod and
rotate the unit until the best
reception is obtained.
Press the FUNC. Button
repeatedly to select the
RADIO mode.
Increase Volume level
Press the FUNC. Button to
select iPod mode.
Re-insert iPod again
Check that Alarm indicator
" " or " " , " " or " "
" " or " " appears in the
Display.
Make sure AM or PM is set
correctly.
Remove all the batteries
(including backup battery
CR2025), disconnect the AC
adaptor and wait a few
seconds for the built-in
micro controller to reset.
Remove all the batteries
(including backup battery
CR2025), disconnect the AC
adaptor and wait a few
seconds for the built-in
micro controller to reset.
DC 6V, "AA" size (UM-3) battery x 4 (Not
12
Solution