Cd Operations - Jensen JiMS-210 Owner's Manual

The CD player supports CD/CD-R / CD-RW discs recorded
CD Playback
1. With the unit power is OFF, press the Push Open
the compartment.
2. Place a CD onto spindle with printed side facing up.
3. Close the CD cover.
4. Press the POWER On/Off
5. Slide the FUNCTION switch to select CD mode.
6. Press the PLAY / PAUSE
7. Adjust the volume level by turning the VOLUME wheel.
8. (a) To skip to a desired CD track, press the
For MP3 disc : press DIR+ button to select different directories (folders).
(b)To fast-forward or fast rewind within the track playing,
press and hold the
(c)To pause CD playback, press the PLAY/PAUSE
The playtime counter stops and flashes.
To resume CD playback, press the PLAY/PAUSE
9. To stop CD playback, press the CD STOP
Total number of tracks and total playtime are shown.
10. To turn the unit off, press the POWER On/Off
CD Play Modes
During the CD playback, you may select different play mode by pressing the P-MODE button.
(a) To repeat playback of one track, press P-MODE button once.
A "repeat one" indicator
(b) Torepeat playback of an entire CD, press P-MODE button twice.
A "repeat all" indicator

CD OPERATIONS

button to turn on the unit.
button to start playback CD music.
FILE TYPE IN CD DISC
TRACK NUMBER
PLAYBACK TIME
FOLDER (DIRECTORY) NUMBER
to advance 10 songs (files) , press the +10 button.
PLAYBACK TIME
/ button.
appears on LCD.
appears on LCD.
either Audio CD or MP3 file format.
located on the CD Cover to open
/ button.
button;
button again.
button.
button .
9