Component Identification - Hotsy 965SS Operating Instructions And Parts Manual

Unloader
Valve
Pump
Pump — Delivers a specific gpm to the high pressure
nozzle which develops pressure.
Spray Gun — Controls the application of water and
detergent onto cleaning surface with trigger device. In-
cludes safety latch.
Detergent Injector — Allows you to siphon and mix
detergents.
Wand — Must be connected to the spray gun.
High Pressure Hose — Connect one end to water
pump high pressure discharge nipple and the other end
to spray gun.
6

COMPONENT IDENTIFICATION

Relief
Valve
Detergent
Injector
Burner
Fuel Oil
Tank
Spray
Gun
97-6554 • HOTSY 965SS-1075SS • REV. 7/05
Burner
Exhaust
Unloader Valve — Safety device which, when the spray
gun closes, prevents over pressurization (Not Shown.)
Note: If trigger on spray gun is released for more
than 2 minutes, water will leak from the pump pro-
tector. Warm water will discharge from pump pro-
tector onto floor. This system prevents internal
pump damage.
Hose
Hanger
Engine
High
Pressure
Nozzle
Wand
High
Pressure
Hose