Table of Contents
Advertisement
Important safeguards
ATTENTION: The owner's manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual.
DANGEROUS VOLTAGE: Uninsulated dangerous voltage that may be of sufficient magnitude to constitute a risk of electrical shock to persons is
present within this product enclosure.
CAUTION: To reduce the risk of electric shock, do not remove cover (or back). Prefer servicing to qualified service personnel.
Power supply
Battery operation
Open the battery compartment cover
Insert 6 batteries (UM-2/LR14). Please observe correct battery polarities or the set will not work.
Close the battery compartment cover.
AC operation
Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.
The AC cord is located inside the battery compartment. Connect it to the unit.
Insert the plug into power supply.
CAUTION:
When the set is only used with AC or is not used for 4 weeks or more, please remove the batteries, to avoid damage to the set from leakage of batteries.
Always switch off the unit when not in use.
Always unplug the appliance from power supply, when no use long time.
Radio operations
Press ON/OFF key once to switch on the system power.
Press BAND key repeatedly to select the radio mode and the desired radio band: AM or FM
Press NEXT/TUNE-UP button or BACK/TUNE-UP button and then release the button when the fast scanning starts. The frequency will continue to
change and will automatically stop when a broadcast station is received.
To receive a weak broadcast signal press the NEXT/TUNE-UP or BACK/TUNE-DOWN button by one press at a time and adjust the frequency you wish
to receive.
4
Advertisement
Table of Contents
