Safety Harness - Baby Jogger city versA Assembly Instructions Manual

SAFety HARneSS

to adjust harness height:
1
Pinch the top of the harness
clip to unlock.
to adjust harness length:
1
Lift up on the bottom of the
harness clip and remove harness
strap from the side retainers.
8 8
2
Slide the harness clip out and
re-clip to the seat loop closest
to the child's shoulder height.
2
Pull on strap end to tighten
shoulder strap or pull on
the main strap to loosen the
shoulder strap.
Warning:
Avoid serious injury
from falling or sliding
out. Always properly
adjust and fasten
safety harness.
3
Place harness strap back into
the side retainers.