Vivotek VS8102 User Manual page 130

VIVOTEK
deletedeny
start <ip address> The starting IP address to add or to delete.
end <ip address> The ending IP address to add or to delete.
index <value>
return <return
page>
Get SDP of Streams
Note: This request requires Viewer access privileges.
Method: GET/POST
Syntax:
http://<servername>/<network_rtsp_s<0~m-1>_accessname>
"m" is the stream number.
"network_accessname_<0~(m-1)>" is the accessname for stream "1" to stream "m". Please refer to the
"subgroup of network: rtsp" for setting the accessname of SDP.
You can get the SDP by HTTP GET.
Open the Network Stream
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http://<servername>/<network_http_s<0~m-1>_accessname>
For RTSP (MP4), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/<network_rtsp_s<0~m-1>_accessname>
"m" is the stream number.
For details on streaming protocol, please refer to the "control signaling" and "data format" documents.
130 - User's Manual
Remove denied IP address range from server. If start and end parameters are
specified, it will try to remove the matched IP address. If index is specified, it will
try to remove the address from given index position. [start, end] parameters
have higher priority then the [index] parameter.
The start position to add or to delete.
Redirect to the page <return page> after the parameter is assigned. The <return
page> can be a full URL path or relative path according to the current path. If you
omit this parameter, it will redirect to an empty page.