Vivotek VS8102 User Manual page 119

enable
priority
delay
trigger
triggerstatus
di
mdwin
inter
weekday
begintime
0, 1 6/6 Enable or disable this event.
0, 1, 2 6/6 Indicate the priority of this event:
"0" = low priority
"1" = normal priority
"2" = high priority
1~999 6/6 Delay in seconds before detecting the next event.
boot, 6/6 Indicate the trigger condition:
di, "boot" = System boot
motion, "di"= Digital input
seq, "motion" = Video motion detection
visignal, "seq" = Periodic condition
virestore, "visignal" = Video input signal loss.
pir, "virestore" = Video input signal resotore
recnotify, "pir" = PIR detection.
tampering, "recnotify" = Recording notification.
"tampering" = Tamper detection.
String[40] 6/6 The status for event trigger
<integer> 6/6 Indicate which DI detects. This field is required
when trigger condition is "di". One bit represents
one digital input. The LSB indicates DI 0.
<integer> 6/6 Indicate which motion detection windows detect.
This field is required when trigger condition is
"md". One bit represents one window. The LSB
indicates the 1
the 1
1~999 6/6 Interval of snapshots in minutes. This field is used
when trigger condition is "seq".
0~127 6/6 Indicate which weekday is scheduled. One bit
represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on Friday and
Sunday, set weekday as 66.
hh:mm 6/6 Begin time of the weekly schedule.
st
window. For example, to detect
st rd
and 3 windows, set mdwin as 5.
VIVOTEK
User's Manual - 119