Drive The Digital Output; Query Status Of The Digital Input - Vivotek VS8102 User Manual

VIVOTEK
Group: disk_i<0~(n-1)> n is the total number of storage devices.
PARAMETER
cyclic_enabled
autocleanup_enabled <boolean>
autocleanup_maxage <positive integer> 6/6

Drive the Digital Output

Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/dido/setdo.cgi?do1=<state>[&do2=<state>]
[&do3=<state>][&do4=<state>][&return=<return page>]
Where state is 0 or 1; "0" means inactive or normal state, while "1" means active or triggered state.
PARAMETER VALUE
do<num> 0, 1
return <return
page>
Example: Drive the digital output 1 to triggered state and redirect to an empty page.
http://myserver/cgi-bin/dido/setdo.cgi?do1=1

Query Status of the Digital Input

Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/dido/getdi.cgi?[di0][&di1][&di2][&di3]
If no parameter is specified, all of the digital input statuses will be returned.
124 - User's Manual
VALUE SECURITY
(get/set)
<boolean> 6/6
6/6
DESCRIPTION
0 – Inactive, normal state
1 – Active, triggered state
Redirect to the page <return page> after the parameter is assigned. The <return
page> can be a full URL path or relative path according to the current path. If you
omit this parameter, it will redirect to an empty page.
DESCRIPTION
Enable cyclic storage method.
Enable automatic clean up method. Expired and not
locked media files will be deleted.
To specify the expired days for automatic clean up.