INSTALLATION
Note:
The correct method for opening the clamps on the DeviceNet
terminal block is simply to insert the screwdriver straight into
the unlocking hole. It does not involve inserting the
screwdriver and then using a lever action to open the clamps.
The increase in screwdriver thickness further up the shaft
opens the clamps as the screwdriver is inserted. Do not
attempt with an improperly sized screwdriver. See figure
below.
FR-EPN
S W 2
x1
S W 1
x10
V +
C A N +
S H L D
C A N -
V-
Actuator
Wire terminal
Wire Color
R E D
W H I T E
G R E Y
B L U E
B L A C K
Insert driver into Actuator
to open Wire terminal
DeviceNet
Cable
- 6 -